Owner's Manual

Network Installation

Xerox ColorQube™ 9201/9202/9203

System Administrator Guide

• Number of pages: *NONE

•Starting time: Time

•Ending time: Time

• Order of files on queue: *FIFO

• Remote system: *INTNETADR

• Remote printer queue: virtual printer name**

Note: The queue for ColorQube should be lp (lower case L and P).

• Writers to autostart: 1

• Queue for writer messages: QSYSOPR

• Library: *LIBL

• Connection type: *IP

• Destination type: *OTHER

• Transform SCS to ASCII: *YES

• Manufacturer type and model: *IBM42011 ***SEE NOTE BELOW***

• Workstation customizing object: xxxxxxxx (leave as default)

•Library: xxxxxxxx (leave as default)

• Internet address: xx.xxx.x.xx (IP address of printer)

•VM/MVS class: *SAME

• Forms control Buffer: *SAME

• Destination options: XAIX

• Text description

• Display any file: *NO

•Job separators: 0

• Operator controlled: *YES

• Data Queue: *NONE

•Library:

• Authority to check: *DTAAUT

2. Press [Enter] to create.

Note: The Workstation Customizing Object is the file that was created in the Create a Device

Description on page 98 step 2.

3. At this point, a spool file (document) should be able to be sent to the ColorQube device.

Note: If printing PCL, set this parameter to HPIIID, HP5Si (most of the HP drivers will work) and

set Workstation customizing object as *none.

If printing ASCII, set this parameter to *IBM42011 (which is the default).