Owner's Manual

Print Drivers
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
117
7. in the Find Printers pop-up menu, enter the name of the printer you are trying find in the [Name]
field, and click on [Find now].
Note: Ensure [Entire Directory] is selected from the In drop-down menu.
8. Select your printer from the list and click on [OK].
9. The status bar will display. In the [Type a printer name], check the [Set as the default Printer]
checkbox.
10. Click [Next].
11. The You’ve successfully added... pop-up window will display, you can print a test page by clicking
on the [Print a test page].
12. Click [Finish].
Create a New Print Queue
• Ensure you have the Internet Services Print and Fax Drivers CD (delivered with your device).
• The device must be configured with a valid IP address or host name, subnet mask and gateway
address.
• LPD (Line Printer Daemon) must be enabled on the device.
Verify that LPR Port Monitor is Loaded
1. Click [Start], [Control Panel] and double-click [Programs and Features].
2. Double-click [Windows Features].
3. In the [Turn Windows Features on and off] window expand the [Print Services] menu.
4. Click on [LPR Port Monitor] to enable the service.
5. Click on [OK]. Your computer may need to restart.
Add the Printer
1. At your Workstation, click on [Start] then select [Control Panel]. Open the [Printers] folder.
2. Click on [Add a Printer].
3. Select [Add a network, wireless or Bluetooth printer].
4. Click on [Next].
5. The Select a printer screen will display, select [The printer that i want isn’t listed], and click on
[Next].
6. In the Find a printer by name or TCP/IP address screen, select [Find a printer in the directory,
based on location or feature], and click on [Next].
7. in the Find Printers pop-up menu, enter the name of the printer you are trying find in the [Name]
field, and click on [Find now].
Note: Ensure [Entire Directory] is selected from the In drop-down menu.
8. Select your printer from the list and click on [OK].
9. The status bar will display. In the [Type a printer name], check the [Set as the default Printer]
checkbox.
10. Click [Next].