Owner's Manual

Device Connection and Quick Setup

Xerox ColorQube™ 9201/9202/9203

System Administrator Guide

• Distribution Centre - this option leaves the ink sticks cold. The device will power down when

the [Next] button is touched.

• Ready to Ship - this option allows the device to power down when the [Next] button is

touched, and when next powered on the ink sticks will be heated and the Installation Wizard

will begin again.

• Customer Site - this option begins heating the ink sticks and continues with the Install

Wizard when the [Next] button is touched.

Note: To prevent internal ink spillage, once the ink is heated, do not move the machine for 30

minutes from power down.

3. Touch the [Next] button, the device will power up and launch.

4. The Languages screen displays, select the required language, and touch the [OK] button.

5. A profile selection screen displays, select one of the following:

• Trained Xerox Installer

• Customer

If the network cable is not connected, the Network Connection Not Detected screen displays

6. In the Passcode Required screen, enter the 4 digit Passcode you received with the device in the

[Enter PagePack Passcode] field using the numerical keypad.

7. A Billing Plan is currently set to default plan for you device, to keep this plan, in the Billing Plan

screen touch the [Next] button.

If you have been provided with an alternative Billing Plan Passcode, touch the [I Have a

Passcode].

8. The Install Wizard Welcome screen displays.

Install Wizard

1. At the Welcome screen, touch the [Next] button.

2. The Tools Access screen displays, to proceed:

a. Select one of the following access rights for the device configuration tools:

• Locked Restricted Access - this option requires a login to access configuration tools.

• Unlocked Open Access - this option allows all users to access the device configuration

tools.

Note: Access rights can be modified using the Internet Services, for more information, refer to

Password Settings on page 145.

b. Touch the [Next] button.

3. The Paper Size Preference screen will display, to proceed:

a. Select one of the following paper size format that most frequently will be used on this device:

• Inches

• Metric

b. Touch the [Next] button.

4. The GMT Offset screen displays, using the left and right arrow button set the Greenwich

Meantime Offset according to the country you are in. Touch the [Next] button.

5. The Date screen displays:

a. For Format select one of the following date format: