Owner's Manual

E-mail
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
226
• [LDAP Referrals]: if the primary LDAP server is connected to additional servers, the
search will continue on those servers as well.
•The Perform Query on option will help control the returns by allowing the LDAP query to
be on [Mapped Name Field] or [Surname and Given Name Fields]. Netscape and
Lotus Domino will typically require a setting of Surname to allow returns of “lastname,
firstname”.
9. Click on the [Apply] button to implement the changes.
To Figure Contexts for LDAP
1. From the LDAP screen, click on the [Contexts] tab at the top of the screen.
Contexts are used with the Authentication feature, contexts speeds up searching through the
LDAP tree by specifying where to look in the tree. The administrator can configure the device to
automatically add an authentication context to the Login Name provided by a user.
2. Enter information in the [Default Login Context] field.
3. Click on the [Apply] button.
To Define User Mappings
Fields contained within LDAP structures are not standardized. This section allows you to find out what
results you will get when searching for a name using one of the LDAP servers. Editing the mapping will
give some control over your LDAP server results, therefore improving name searches for the user.
To m ap the LDAP fields :
1. From the LDAP screen, click on the [User Mappings] tab under the LDAP title at the top of the
screen.
a. The Server Information area will display a summary of the LDAP server settings assigned in
the LDAP Server screen.
b. The Search area lets you test the LDAP name search and field matching capability. Enter
details in the [Enter Name] field and click on the [Search] button.
c. The information about this user is then displayed against the fields shown on the device. By
using the drop-down menu under Imported Heading boxes re-map any fields you require
against the device’s properties.
Note: Internet Fax users should ensure that the Internet Fax field is NOT set to “No Mappings
Available” in the drop-down menu. This setting will prevent the LDAP Address Book appearing on
the Internet Fax screen at the device. Select the field that contains the Internet Fax addresses, in
many cases, there is no unique Internet Fax address, therefore, regular e-mail address is used.
2. When you have finished making your selections click on the [Apply] button.
At the Device:
1. Select the [E-mail] button, then touch [OK].
2. Touch [Address Book].
3. Enter a name using the keyboard touch screen, for example: lastname, firstname.
4. Touch [Search]. The Search Results Screen is shown.
5. Select the required name from the list (if there is more than one match).