Owner's Manual

Software Upgrade
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
310
8. In the Upgrades area:
a. Check to [Enabled] checkbox.
b. Click on the [Apply] button.
9. Click on the [Auto Upgrade] in the directory tree to set the Auto Upgrade time.
10. In the Auto Upgrade area:
a. Check the [Enabled] checkbox to enable the Schedule Upgrade feature.
b. For Refresh Start Time, select either [Hourly] or [Daily].
c. If [Daily] has been selected, enter the required time of the day for the upgrade to be
performed.
d. For [Protocol], select either [IPv4 Address], [IPv6 Address] or [Host Name].
e. Enter the IP Address and Port or the Host Name and Port of the server where the software
upgrade file (obtained earlier) is located.
f. Enter the path to the upgrade file on the server in the [Directory Path] field.
g. Enter the [Login Name] and [Password] for the server.
h. Click on the [Apply] button to accept the changes.
The upgrade will now be performed automatically on the device at the time specified. Once the
upgrade process starts network connectivity with the device will be unavailable, including access
from Internet Services. The upgrade progress can be monitored from the device screen interface.
Note: Software Installation will begin several minutes after the software file has been submitted
to the device. Once Installation has begun all Internet Services from this device will be lost,
including this web user interface. The installation progress can be monitored from the local user
interface.