Owner's Manual

General Setup
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
30
e. When MRC Compression is enabled, select one of the following MRC Compression Format
option:
• Multi-Mask Compression - tends to produce cleaner and sharper pages. On a multi-
mask MRC compressed page, contents with similar colors are extracted, combined and
encoded as masks. However, occasional mistakes can be made causing image artifacts
such as lines and text shifting colors.
• 3-layer Compression - segments the image into a layer with the image’s sharp edges
(generally known as the text or mask layer), a graphic (background) layer, and a
foreground layer that defines the colors of the text in the mask layer. The mask layer is
compressed using JBIG2 (PDF) or Flate (XPS) compression as configured by the SA. The
background layer is compressed using either JPEG or Flate compressed-JPEG. The
foreground layer is compressed using a lower quality JPEG compression than the
background layer since the only data that is to be retained are the colors of the text in
the Mask layer. The layers are re-assembled as a PDF, PDF/A or XPS page for export.
9. XPS is Microsoft's new electronic paper format, an alternative to PDF. XPS is currently supported
as a saved file format in Microsoft Office 2007, with an XPS viewer built into Windows Vista.
Microsoft states that Windows vista uses the XPS format as a document format, a windows spool
file format, and a page description language for printers.
In the XPS Setting (Email Only) area, for MRC Compression:
a. Check the [Enabled] checkbox.
b. If enabled, select one of the following MRC Compression Format option:
•Multi-Mask Compression
•3-layer Compression
Note: Regarding Searchable XPS: If this option is available, by enabling the selection you will
provide Workflow Scanning, E-mail, and Internet Fax users with the ability to choose [Searchable]
as an option for their XPS file format. The Searchable Format provides a second layer of data with
the text of the scanned document. The second layer is converted to an optical character readable
format, enabling the text of the document to be searched on, copied, and pasted, as desired.
10. Click on the [Apply] button.
11. Click on the [OK] button when you see the message “Properties have been successfully
modified”.
Accessing Image Settings for Workflow Scanning
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [Services] link.
6. Click on the [Workflow Scanning] link.
7. Select [Default Template] in the directory tree.
8. Scroll to the Workflow Scanning area, click on the [Edit] button.