Owner's Manual

General Setup
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
32
Job Deletion
The Job Deletion page allows you to set permission that allow System Administrators or non-
administrator users to delete jobs from the device print queue.
Note: System Administrators can always delete any job, regardless of the setting selected on the
Job Management Page.
At the Device:
1. Press the <Log In/Out> button to enter the Tools pathway.
2. Enter the Administrator’s User Name [admin], touch [Next], enter Password [1111], touch
[Enter].
3. Press the <Machine Status> button.
4. Touch the [Tools] tab.
5. Touch [Security Settings].
6. Touch [Authentication].
7. Touch [Job Deletion].
8. Touch either:
• [All Users] to allow any user to delete any job in the job list. There is no authentication
needed when the user clicks on a job in the job list and selects Delete.
• [System Administrators Only] to allow only users with administrative access (password) to
delete jobs. The System Administrator must provide a username and password when deleting
a job.
9. Touch [Save] button.
10. Press the <Log In/Out> button, then touch [Logout] to exit the Tools pathway.
Internationalization
Internationalization allows administrators to specify the locale where the device is situated. This is
used to determine the type of coding used by the device to interpret data, such as print jobs.
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Click on the [Internationalization] in the directory tree.
7. If you want to specify the locale, select the required setting from the [Select Locale] drop-down
menu. The device will make an assumption on the encoding that are most likely used.
8. If you want to enter the specific encoding of user strings provided for the device, select [Custom]
from the [Select Locale] drop-down menu, and select the required encoding priority order.
9. Click on the [Apply] button to save your changes.
10. Click on the [OK] button when you see the message “Properties have been successfully
modified”.