Owner's Manual

General Setup
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
34
Extensible Services Setup
This feature allows the System Administrator to set up and enable extensible services on the device.
Extensible Services enables independent software vendors and partners to develop customized
programs to access directly from the device’s control panel. Users can enter their authentication login
at the device, and access a set of features and options designed specifically for their business need.
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
• Ensure the device is fully functioning on the network.
• TCP/IP and HTTP protocols must be enabled on the device so that the device’s web browser can be
accessed.
• Ensure Extensible Service Registration must be configured.
To Enable Extensible Services
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4. Click on the [Login] button.
5. Click on the [General Setup] link.
6. Select [Extensible Service Setup] in the directory tree.
7. In the Setup (Required) area, ensure HTTP (SSL) and Extensible Service Registration have been
configured to enable Extensible Services. If they have not been enabled, click on the [Settings]
button and configure the settings and click on the [Apply] button.
8. In the Enable Extensible Services area check the [Export password to Extensible Services]
checkbox to send passwords to Extensible Services.
9. In the Browser Settings area, check the following required checkboxes to enable options for
Extensible Services:
• Enable the Extensible Services Browser.
• Verify Server Certificates - if this option is enabled, Extensible Services will check and require
valid server certificates.
10. Click on the [Apply] button to save your changes.
11. Click on the [OK] button when you see the message “Properties have been successfully
modified”.
SMart eSolutions
SMart eSolutions provides a setup page to guide you through the steps required to configure the
device for automatic meter readings. SMart eSolutions enables the device to automatically send data
to Xerox to be used for billing (Meter Assistant) and solid ink (Supplies Assistant).
SMart eSolutions provides the following features: