Owner's Manual

Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
65
6. Touch [TCP/IP Enablement].
a. Touch [Enable] for IPv4 and IPv6.
b. Touch [Save].
7. Touch [Dynamic Addressing].
a. Touch [Disabled] to disable DHCP.
b. Touch [Save].
8. Touch [IP Address/Host Name].
a. Touch button under the [IPv4 Address] heading.
b. Enter the IP Address using the on-screen keypad and touch [Save].
c. Touch button under the [Host Name].
d. Type the host name EXACTLY as you want it to appear. To access more characters, touch
[123] on the user interface.
e. Touch [Save], then touch [Close].
9. Touch [Subnet and Gateway].
a. Touch [Subnet Mask], enter the Subnet Mask address using the on-screen keypad.
b. Touch [Save].
c. Repeat this process for the IP Gateway. When you are finished, touch [Save] to accept the
changes and return to the TCP/IP Settings screen.
d. Touch [Close] twice to return to the feature menu.
10. Touch [Advanced Settings].
11. Touch [Continue].
12. Touch [HTTP Settings].
a. Ensure Enable is selected. If not, touch [Enable].
b. Touch [Save], then touch [Close] twice to return to the Tools menu.
DNS/DDNS Configuration
1. From the Tools menu,
2. Touch [Network Settings].
3. Touch [TCP/IP Settings].
4. Touch [DNS Configuration]. This feature will be inaccessible (grayed out) if TCP/IP protocol is not
enabled.
a. Touch the [Domain Name] button.
b. Touch the button under Domain Name.
c. Touch the [Clear Text] button to remove the default name before entering the new name
using the on screen keyboard.
d. Touch [Save].
e. Touch [Close].
5. Touch [Preferred DNS Server].
a. Touch the button under Preferred DNS Server #1, enter the DNS Server IP Address using the
on-screen keypad.
b. Touch [Save], then touch [Close].