User's Manual

AdvancedPunch

The AdvancedPunch uses a variety of easily interchangeable die

sets that allow you to punch documents in line for several different

binding styles. By selecting the appropriate die set, you can use your

AdvancedPunch to punch documents in any of the binding styles

indicated in Table 1.

4. PUNCHING PATTERNS

For Plastic Comb Binding choose from:

PB Plastic Bind; Hole Size: 8mm x 2.9mm (0.313" x 0.116") (LxW); Center-to-Center Hole Spacing: 14.3 mm (0.563")

For Twin Loop™ Binding choose from:

W3 Wire; Square; 3 Holes per inch; Hole Size: 4mm x 4mm (0.156" x 0.156") ( L x W); Center-to-Center Hole Spacing: 8.5 mm (0.333")

W2 Wire; Rectangle; 2 Holes per inch; Hole Size: 6.4mm x 5.4mm (0.250" x 0.214")(L xW); Center-to-Center Hole Spacing: 12.7 mm (0.500")

For Color Coil™ Binding choose from:

C4 Coil; Round; 4 Holes per inch; Hole Size: 4.4mm ( 0.174") Diameter; Center-to-Center Hole Spacing: 6.3mm (0.2475")

For Velo

Bind choose from:

VB Velobind

; Round; 1 Hole per inch Hole Size: 3.2mm ( 0.125") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")

For Velo® Bind choose from:

For Looseleaf Binding choose from:

3 Ring Binder; U.S. (Standard Looseleaf Patterns); Hole Size: 8mm (0.316") Diameter

Graphics do not represent actual punch pattern dimensions or spacing.

1 19

441

For Proclick

Binding choose from:

W3 Proclick

; Rectangle; Hole Size: 4.9mm x 5.5mm; 0.196”x0.215”(LxW); Center-to-Center Hole

Spacing:8.5mm(0.333”)

Xerox Part Number:

XEROX PB-19H 008R13066

XEROX C4-44H 008R13067

XEROX W2-21H-SQ 008R13068

XEROX W3-32H-SQ 008R13069

XEROX VB-11H 008R13070

XEROX PC-32H 008R13071

XEROX 3H 008R13072