User's Manual

Here are two examples:
• If the Low Power Mode is set to 15 minutes and the Sleep Mode is set to 60 minutes,
the Sleep Mode activates after 60 minutes of total inactivity and not 60 minutes
after the Low Power Mode begins.
• If the Low Power Mode is set to 15 minutes and the Sleep mode is set to 20 minutes,
the Sleep Mode activates 5 minutes after the Low Power Mode begins.
When logged on as administrator, the time periods for both Low Power and Sleep Mode
may be set from Tools > System Settings > Common Service Settings > Energy
Saver Settings.
Exiting the Energy Saver Mode
1. Press Energy Saver, or
2. Send a print job to the machine.
Print server overview
One of the following print servers may be available and used with your machine:
• Xerox
®
FreeFlow
®
Print Server
• Xerox
®
EX Print Server, Powered by Fiery
®
Note
For detailed information on your specific print server, refer to the customer
documentation that was delivered with it.
Feeding and finishing devices
Available with your machine is a variety of optional feeding and finishing devices. These
devices are briefly discussed on the following pages along with where to find specific
information on each device.
User Guide1-6
Product Overview