User's Manual

8. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Reinserting the standard staple cartridge
Use this procedure if the standard staple cartridge is inserted incorrectly into the machine.
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
User Guide16-34
Standard/Booklet Maker Finisher