User's Manual

Note
A message will be displayed and the machine will not operate if the right cover of
the finisher is even slightly open.
Clearing E3 jams
Use the following procedure to clear jams when the E3 LED is lit on the SquareFold
Trimmer Module control panel.
1. Make sure that the machine is not in operation, and press the button on the right
cover of the Trimmer unit to open the cover.
2. Remove the jammed paper.
3. Close the right cover of the Trimmer unit.
17-15Xerox
®
D110/D125/D136 Printer
User Guide
SquareFold Trimmer Module