User's Manual

Cause and RemedyFault code
Cause: The address of the DNS server is not registered on the machine.
Remedy: Either register the address of the DNS server on the machine or set the
address of the job template server by an IP address.
027-745
Cause: The specified job template pool server protocol settings are incorrect.
Remedy: Set up the correct port.
027-746
Cause: Attempted to command a print job to a scanned document.
Remedy: Scanned document cannot be printed. Configure the job flow correctly.
027-750
Cause: When following the job flow, an error occurred.
Remedy: Check the settings for the job flow.
027-751
Cause: In a job flow, a job start was specified before a required item was input.
Remedy: Configure a default to input the required item in the job flow or change
the job flow to have the required item link to the mailbox.
027-752
Cause: The necessary port for the job flow is either not enabled or is unavailable.
Remedy: Have your System Administrator check the port status.
027-753
Cause: PDL (Printer Description Language) error detected by the controller while
processing a network print job.
Remedy: Cancel and resend the print job. If problem continues, reboot both the
controller and the printer and resend job. If the problem persists, call the Customer
Support Centre for further help/instructions.
027-770
Cause: Disk full error message on the controller.
Remedy: Cancel job. Delete unwanted files from the controller. Resend the network
print job.
027-771
Cause: When the machine is configured to only print attached documents when
received by mail, a message with no attachments is discarded upon receipt.
Remedy: To print the mail body or header information as well, change settings in
the CentreWare Internet Services Properties screen.
Refer to “E-mail Print” in the System Administration Guide.
027-796
Cause: Invalid received mail output destination.
Remedy: Specify a correct output destination and send the mail again.
027-797
Cause: A communications error occurred between the document scan unit and
the document feeder.
Remedy: Contact the Customer Support Center.
062-277
Cause: The scanned document is copy-protected.
Remedy: Refer to the Safety Guide, and check to see if the document can be
copied.
062-790
Cause: An error occurred with the machine.
Remedy: Contact the Customer Support Center.
065-210
Cause: Paper Tray 1 malfunctioned.
Remedy: Contact the Customer Support Center. Trays other than Paper Tray 1
can be used.
071-210
Cause: Paper Tray 2 malfunctioned.
Remedy: Contact the Customer Support Center. Trays other than Paper Tray 2
can be used.
072-210
10-21Xerox
®
D110/D125/D136 Printer
User Guide
Problem solving