Manual

Page 3
Setup
Server name
You cannot assign the server the same name as the device name (DC250). Utilities may
not function properly.
Fiery device name
For both DocuColor 250 and DocuColor 240 copiers, the Fiery device name is DC250. On
the Configuration page and other Fiery pages, DC250 refers to the device name, which
applies to both products. Use this device name when starting applications such as Command
WorkStation and ColorWise Pro Tools.
More Setup
Similar to WebSetup, More Setup in WebTools lets you set printing defaults, configure
network services, and perform administration tasks. For some Setup options in WebSetup
or Command WorkStation, you must set additional options in More Setup. The tabs under
More Setup are described in Configuration and Setup, along with their related Setup options
or tasks.
If you make changes to the settings in the following areas under More Setup, you must click
Reboot Server in WebSetup for the changes to take effect: Network Setup 2, SNMP Setup,
Time Zone, Misc Setup, Optional Features.
Point and Print default printer driver
You can specify the type of printer driver (PostScript or PCL) that is installed by the Point and
Print feature in More Setup > Network Setup 1. Before you change this setting, delete all
printer drivers on client computers first (using the Fiery Printer Delete Utility). Otherwise,
existing printer drivers on client computers may become corrupted.
Changing the time in WebSetup
When you change the time and date using the DocuColor 240/250 Tools mode, the change
applies to the copier only, not the Fiery. To change the time and date on the Fiery, use
WebSetup. The time on the Fiery is shown in the header of reports such as the Job Log
and Configuration page.
Cannot disable Web Services
You cannot disable Web Services in WebTools. If you disable Web Services and reboot the
Fiery, Web Services is once again enabled automatically.