Installation guide

DocuMate 250 Scanner Installation Guide 11

Scanning with the Scanner Button

Scanning with the

Scanner Button

When you press the scanner button, your document is scanned

using predefined scan settings and then the image is sent to a

software application on your computer. To change scan settings,

see “Configuring the Scanner Button” on page 12.

Load and Scan Documents

1. If you are scanning legal-sized documents, unfold the output

tray extension.

2. Adjust the paper guide for the size of paper.

3. Load the documents face down, with their tops into the

automatic document feeder.

NOTE: Remove any staples or paper clips from the documents

before loading them into the automatic document feeder. Staples

and paper clips can jam the feed mechanism.