Operation Manual

Scanning
26 DocuMate 250 Scanner User’s Guide
These icons next to each scan configuration indicate the scanning mode:
Select Format—A set of file formats for the scanned image for the
selected button. The available formats are based on the type of
destination application you select.
The icon names indicate their file types. See “Selecting Document and
File Format Options” on page 35 for more information about the available
formats.
Options tab—Displays a window for selecting options related to the
selected Destination Application for the scanned image. See “Selecting
Options for a Button” on page 39 for instructions on configuring the list of
available destinations.
Properties button—Displays a window for selecting properties for each
type of Destination Application. See “Setting Destination Application
Properties” on page 41.
Refresh button—Updates the links between all your computer’s
Destination Applications and One Touch 4.0. If you install new software
that can be used as a Destination Application, click the Refresh button to
link the new software to One Touch 4.0.
New/Copy/Edit/Delete buttons—Click New or Copy to add new scan
configurations to the list. Click Edit or Delete to change or remove them.
See the sections “Creating a New Scan Configuration” on page 27 and
“Editing or Deleting Scan Configurations” on page 34.
OK/Cancel/Apply buttons—OK accepts any changes and close the
window. Apply accepts any changes but leaves the window open so you
can continue making additional changes. Cancel closes the window
without accepting any changes.
NOTE: Use Configure Before Scan if you want to set the scanning
mode manually before scanning. See “Configure Before Scan” on
page 46.
Color GrayscaleBlack and White
Configure
Before Scan