User's Manual

Using DocuSP IPDS
DocuSP 4.2 DocuPrint
NPS/IPS
7.X
DocuPrint
NPS/IPS
8.X
DocuSP IPS
Gateway
DocuPrint
75/90 EPS
Host Connectivity
TCP/IP (Ethernet) Yes Yes Yes Yes
SNA across Ethernet (LU6.2) No No No No
Bus & Tag Yes Yes Yes Yes
SNA No No No No
Token Ring Yes, for
products that
support token
ring.
Yes Yes Yes
Parallel No No No No
ESCON No No No No
FICON No No No No
Supported Printer
Emulations
AFCCU Yes Yes Yes Yes
AFP Yes Yes Yes Yes
IBM Group 3 Page Printers Yes Yes Yes Yes
Alternate Printer Model Allows system
to be identified
using any 4
digit field, and
provides menu
selections for
3812, 3825,
3827, and
3935.
Allows system
to be identified
using any 4
digit field.
Allows system
to be identified
using any 4
digit field.
Allows system
to be identified
using any 4
digit field.
Color Support
Black and White Yes Yes Yes Yes
Spot Color No No No No
Full Color Yes (with color
print engine)
No Yes No
Extraction Color (allows 8 IPDS
defined highlight colors to be
mapped to 10 colors supported
by DP92C).
No Yes Yes No
Alternate Shading (Allows
choice between hardware or
software scaling of 240 resource
at printer or s/w. Shading
performed as part of scaling.)
Not supported,
since no
DocuSP
products
output to the
IOT at 240 dpi.
Yes Yes No
Highlight Color Yes, HLC
commands
supported for
color and
monochrome,
Yes Yes Yes
Xerox DocuSP IPDS User Guide 4-3