User's Manual

Using DocuSP IPDS
DocuSP 4.2 DocuPrint
NPS/IPS
7.X
DocuPrint
NPS/IPS
8.X
DocuSP IPS
Gateway
DocuPrint
75/90 EPS
allows the
user to set an
end of job
time-out with a
range of 1 to
60 seconds.
Continuous Forms Emulation
(90¡ rotation)
Yes Yes Yes Yes
AFP Specified Finishing (AFO -
Apply Finishing Operations)
No No No No
Output Finishing Options
DFE
Stitcher/DFA Through main
DocuSP GUI
Yes Yes Yes
Face Up/Face Down Through main
DocuSP GUI
Yes Yes Yes
N-1/1-N Through main
DocuSP GUI
Yes Yes Yes
Minset (1-10) Through main
DocuSP GUI
Yes Yes No
Maxset (10-512) Through main
DocuSP GUI
Yes Yes Yes
Max Size Exceed Options Through main
DocuSP GUI
Yes Yes No
Normal (large job mode) Split
into Multiple Sets/1-N without
Finishing
No Yes No No
Simplex Yes Yes Yes No
Map virtual bins to physical
stackers
EPS - Yes
61XX - Yes
Nuvera - Yes
iGen3 - Partial
EPC - No
EPS HLC -
Yes
Yes No No
Map virtual input trays to
physical feeders
Yes for all
supported
products,
except iGen3.
Yes No No
Miscellaneous
Infinite Length Jobs Yes Yes Yes Yes
DC (Device Control) Yes Yes Yes Yes
Background Shading Yes Yes Yes Yes
Printer Fault Sent to Host Yes, but
DocuSP only
calls for
Yes Yes Yes
Xerox DocuSP IPDS User Guide 4-5