User's Manual

Specifying print format parameters
4-102 Using LCDS Print Description Language
ROUTE RFORM
Specifies a form to be printed with all RTEXT pages.
Syntax ROUTE RFORM = {formid | NONE}
Options
Default NONE
ROUTE RFORM
parameter: points
to note
• The RFORM parameter is not allowed in a ROUTE command
that is a catalogued file, but it may be specified in the ROUTE
command in a JSL invoking the catalogued RTEXT file. It
also may be specified in the RFORM DJDE.
• If RTEXT data is not specified, the system ignores the
RFORM command. However, you can specify RTEXT as one
blank character (or space) in order to print an RFORM on the
routing page without any accompanying text.
ROUTE RTEXT
Specifies text that will be printed on a separate page preceding a
report or report copy.
Syntax [ac:] ROUTE RTEXT = {NONE | sc | (sc [, {passnum | ALL} [, line
[, col [, fontindex]]]]) | rtextid}
Table 4-88. ROUTE RFORM parameter options and definitions
Option Definition
formid form identifier.
Name of the form that will be used with all RTEXT pages. This identifier
references a previously created form file (formid.FRM).
NONE Specifies that no form will be printed on RTEXT pages.