User's Manual

PDL command quick reference
Using LCDS Print Description Language B-5
LINE LINE BASELINE = {TOP | LARGE[ST] | CENTER | BOTTOM} —
LINE BLANKTYPE = {SPACE | NOSPACE} NOSPACE
LINE DATA = (pdo, length) offline: 1,134;
online: 0,150
LINE FCB = {IGNORE | PROCESS} PROCESS
LINE FDATA = (offset, termination) 0, DEFAULT
LINE FONTINDEX = {offset | offset ([,initval][, bitopt]) | NONE} NONE
LINE GDATA = (offset, termination) 0, DEFAULT
LINE INKINDEX = {offset | offset ([, initval][, bitopt]) | NONE} NONE
LINE LPI = {(linespacing {LPI | DOTS | XDOTS}) | (linespacing
{LPI | DOTS | XDOTS}, lineno, (...))}
—
LINE MARGIN = {value | (value, valuetype)} 1, POS
LINE OVERPRINT = (overopt, disp) PRINT, NODISP
LINE PCC = (offset, transtype)0,NOTRAN
LINE PCCTYPE = {PCCname | PCCid | USER} offline: ANSI
online: IBM4245
LINE UCSB = {IGNORE | PROCESS} PROCESS
LINE VFU = {VFUid | NONE} NONE
LMODIFY LMODIFY = TEST —
MESSAGE MESSAGE ITEXT = {sc | (sc, passnum) |
NONE | WAIT} NONE
MESSAGE OTEXT = {sc | (sc [, passnum]) [,WAIT] | sc [, END]
[, WAIT] | NONE}
NONE
Table B-2. PDL command quick reference table (Continued)
Command Syntax Default