Operating Guide

DocuTech 128/155/180 HighLight Color Operator Guide 3-57
Routine maintenance
a. Locate the green pin release handle under spool B, as
shown in figure 3-56.
Figure 3-57 Removing the stitcher spool pin
b. Pull and hold the handle forward and remove the pin.
c. Release the handle and remove stitcher spool A.
8. Install the new stitcher spool.
a. Slide the new stitcher spool into position with the paper
wrapper still in place.
b. Replace the stitcher spool pin. Push it down until it locks
into place, as shown in figure 3-57.