Operating Guide

DocuTech 128/155/180 HighLight Color Operator Guide 2-25
System components
Accessing FreeFlow Remote Print Server remotely
FreeFlow Remote Print Server, a remote graphical user interface
(GUI), is available for installation from a CD. FreeFlow Remote
Print Server allows you to manage your FreeFlow Print Server-
based printers from a single PC or Sun workstation. You may set
your preferences from the remote client to disable or enable some
or all connections.
FreeFlow Remote Print Server allows you to configure the printers
that you want to manage, and provides real time status of the
printers. You may switch between the printers that you are
managing, but you can display only one printer GUI at a time.
The remote client GUI looks and functions the same as the local
FreeFlow Print Server GUI on the print server.
Moving the print server
To ensure consistent performance and avoid any damage to
equipment, follow these rules for placing the components of the
print server.
Do:
Use the print server stand that comes with your printing system
equipment.
Keep the processor in an upright, vertical position.
Allow at least 6 inches / 152 mm of unobstructed space at the front
and rear of the processor, so the fan and vents are not blocked.
CAUTION: Do not place the monitor on top of the processor. Do
not block any fan or vent on the front, sides, or rear of the
processor.
Do not:
Do not place the monitor on top of the processor.
Do not allow any piece of equipment to blow warm air into the air
intake vents of the processor.
Do not place the processor on its side, or in any other position but
the upright, vertical position achieved by using the print server
stand.
Do not place the processor or monitor on top of the printer.
Tape drives overview
The DocuTech 128/155/180 HLC supports several types of tape
drives that may be used to load resources (forms, fonts, etc.) or to
submit offline LCDS print jobs.
A 26-track cartridge tape drive can be used only to import
resources to the system disk. A 9-track or 36-track tape drive can
be used to submit print jobs to the printer or to load resources.