Operating Guide

2-26 DocuTech 128/155/180 HighLight Color Operator Guide
System components
The FreeFlow Print Server Tape Client software enables
transmission of data from a cartridge or open reel tape to the
FreeFlow Print Server via the Socket gateway.
The 4 GB external SCSI quarter inch cartridge (QIC) tape drive is
an external device. The cartridge tape drive connects to the print
server through the SCSI port on the processor back panel.
Like the diskette and DVD drives, this tape drive is not an input
source for print jobs or for any other data or application. You can
use it to load resource files, and the service representative uses it
to load system maintenance files or to save diagnostic
information.
Figure 2-15. 26-track cartridge tape drive
36-track cartridge
tape drive
An 18/36-track cartridge tape drive is an option. You can use this
drive to load resources and to submit offline LCDS print jobs.
Peripheral cabinet (9-track and 18/36-track tape drives)
Some Xerox customers may already have a peripheral cabinet
that houses a 9-track magnetic and an 18/36-track cartridge tape
drive. If a peripheral cabinet has either of the following 18-track
tape drives, they are not supported:
STK 4220 MOD 1 tape drive
STK 4220 MOD 2 tape drive