Operating Guide

3-10 DocuTech 128/155/180 HighLight Color Operator Guide
Routine maintenance
Figure 3-5 Measuring the paper curl
3. Place the bottom edge of the prints over the paper curl
measurement chart in this guide.
• If the print curl on the printed paper measures between +1
and - 2, do not change the decurler setting.
• If the curl is between +2 and +3, or - 3 and - 4, refer to the
procedure, "Adjusting the decurler lever," in this section.
NOTE: Superior performance for greater than substance 32
(120 g/m2) can be achieved between +1 and -1 curl.