User's Manual

HONEYWELL TAPES
10-6 XEROX LASER PRINTING SYSTEMS TAPE FORMATS MANUAL
Table 10-5. SPR 1HDR label (Honeywell 200/2000 system print
tapes)
Name
Character
position(s)
Description
Label identifier 1-5 This is a 5-character identifier 1HDRb.
Reserved 6-20 Unspecified contents.
Program-segment
name
21-28 Program-segment name in the host EXEC statement for this job step.
Job step number 29 Octal number which denotes this job step.
Form type 30
31
32
33
Denotes printed paper form type (f) to be used for reports 1 through 4, where
f = type (0-9, A-Z).
Reserved 34-40 Unspecified contents.
Record length 41-42 Octal number that indicates maximum record (item) length in bytes (always
0205).
Blocking factor 43-44 Octal number that indicates tape blocking factor.
Fixed record-length
indicator
45 Fixed record-length indicator (always 1).
Block length 46-48 Octal number that indicates maximum block (physical record) length.
Reserved 49 Unspecified contents
Banner length* 50 Banner character length.
Volume sequence
number*
51 Octal number (1-63) that indicates the tape reel number. This number is the
order of the volume within the multi-volume group created at the same time.
File identifier* 52-61 ob name.
Job step part number 62 Octal number which denotes the job step part.
Beginning volume
sequence number
63 Octal number (1-63) that indicates the tape reel number on which this job
step part started.
Reserved 64-76 Unspecified contents.
File designator 77 Octal number which designates a file (always 40).
Peripheral control
character length
78 Peripheral control character length (always 1).
Peripheral control
character position
79-80 Relative position of the peripheral control character within each record (item)
of the file (always 1).
* Used by the operating system.