User's Manual

HONEYWELL TAPES
10-12 XEROX LASER PRINTING SYSTEMS TAPE FORMATS MANUAL
Processing parameters for Honeywell 200/2000 carriage control are
as follows:
Honeywell 600/6000 tape formats
Standard system format tape labels, which are described in the
following section, are the only Honeywell 6000 tape labels supported.
Variable length records on labeled tapes are supported on 9-track
tapes when the data code is 4 x 3 packed BCD. The packing method
and BCD coding used on Honeywell 6000 tapes are described in
figure 10-6 and table 10-9. This tape format includes embedded
control characters and normal edit printer carriage control.
66 36 No print, space to 6 lines.
67 37 No print, space to 7 lines.
70 38 No print, space to 8 lines.
71 39 No print, space to 9 lines.
72 3A No print, space to 10 lines.
73 3B No print, space 11 lines.
74 3C No print, space 12 lines.
75 3D No print, space 13 lines.
76 3E No print, space 14 lines.
77 3F No print, space to 15 lines.
Table 10-8. Printer carriage control (Honeywell 200/2000
system printer tapes (continued)
Code
Octal Hexadecimal Function
* If bottom-of-form (BOF) detected during spacing, skip to top-of-form (TOF) and discontinue spacing.
H200/H2000
INITIAL TOF
DEFAULT (OVR, PSP1)
ADVTAPE YES
MASK ’FF’
ASSIGN Values shown in table 10-8.