User's Manual

iv XEROX LASER PRINTING SYSTEMS TAPE FORMATS MANUAL
Operation safety
Your Xerox equipment and supplies have been designed and tested
to meet strict safety requirements. These include safety agency
examination and approval, and compliance with established
environmental standards. Attention to the following notes will ensure
the continued safe operation of your equipment.
Always connect equipment to a properly grounded power source
receptacle. If in doubt, have the receptacle checked by a qualified
electrician.
!
Warning: WARNING: Improper connection of the equipment
grounding conductor can result in electrical shock.
!!
Always place equipment on a solid support surface with adequate
strength for the weight of the machine.
Always use materials and supplies specifically designed for your
Xerox equipment. Use of unsuitable materials may result in poor
performance and can possibly create a hazardous situation.
Never move or relocate either the printer or the system controller
without first contacting Xerox for approval.
Never use a ground adapter plug to connect equipment to a power
source receptacle that lacks a ground connection terminal.
Never attempt any maintenance function that is not specifically
described in your operator guide.
Never remove any covers or guards that are fastened with screws.
There are no operator-serviceable areas within these covers.
Never override or “cheat” electrical or mechanical interlock devices.
Never use supplies or cleaning materials for other than their intended
purposes. Keep all materials out of the reach of children.
Never operate the equipment if unusual noises or odors are noticed.
Disconnect the power cord from the power source receptacle and call
Xerox service to correct the problem.
If you need any additional safety information concerning the
equipment or materials Xerox supplies, call Xerox Product Safety at
the following toll-free number:
1-800-828-6571