User's Manual

XEROX ANSI STANDARD LABELED TAPES AND UNLABELED TAPES
XEROX LASER PRINTING SYSTEMS TAPE FORMATS MANUAL 7-5
Note: Under Xerox carriage control, a special case of page
overflow processing can occur. If the bottom-of-form line number is
encountered as the result of a skip-to-channel command, then print-
and-space commands below bottom-of-form are allowed.
The processing parameters for Xerox carriage control are as follows:
F7 Skip to channel 7, print, and upspace 1 line.
Table 7-2. Xerox printer control characters (continued)
Code
(hexadecimal)
Function
* These characters in combination with the characters that inhibit
automatic upspace will be processed according to the job descriptor
entry selected for overprint handling.
Xerox
INITIAL TOF
DEFAULT (IGN, PSP1)
ADVTAPE YES
MASK X‘FF’
ASSIGN Use values in table 7-2