User's Manual

MEDIUM BURROUGHS SYSTEM TAPES
8-4 XEROX LASER PRINTING SYSTEMS TAPE FORMATS MANUAL
The processing parameters for all medium Burroughs carriage
control are as follows:
1. During label processing the printing software ascertains
whether or not a tape is a printer backup tape. Therefore, no
special specification for printer backup is needed in the LABEL
left/right parts.
2. The label is printed on a printer backup tape if one or more of
the following is true
• The JDE contains the specification PLABEL = YES.
• The label print flag in the label is zero.
• The forms required flag in the label is set.
In the first case above, the ending labels as well as the start-of-file
labels are printed.
0031 No print, skip to channel 11
0000 0001 Print, skip to channel1
0100 Print, space 1 lines 0002 Print, skip to channel2
0200 Print, space 2 lines 0003 Print, skip to channel3
.. ..
.. ..
.. ..
9800 Print, space 98 lines 0009 Print, skip to channel9
9900 Print, space 99 lines 0010 Print, skip to channel10
0011 Print, skip to channel11
Table 8-1. Burroughs 4700 four-byte printer carriage
control (continued)
Value Function Value Function
medium Burroughs B2500, B2700,
B3500, B3700, or B4700
INITIAL TOF
DEFAULT (OVR, PSP1)
ADVTAPE YES
MASK X'FF
ASSIGN Use values in table 8-1.