User's Manual

System Guide 9-9
Hints and Tips
Command Line Utilities
Utility Change Description Focus
/opt/XRXnps/bin/setascii decomposer Forced ASCII files through designated
decomposer (that is, ASCII through
PCL). Implemented in queue
manager in 2.1
Black and
white
/opt/XRXnps/bin/setfifomode Enables FIFO job reception mode in
front end of system.
Both
/opt/XRXnps/bin/setFontSize In 3.1, allows user to set the font size
on the main GUI to a larger and more
visible size.
Both
/opt/XRXnps/bin/setimagepath Disables/Enables Xerox Image Path.
any problems that necessitate using
this utility should be reported to Xerox
development ASAP.
Color
/opt/XRXnps/bin/setlcdsDJDEsemicolon Allows for correct printing of a DJDE
that has the incorrect termination
of;END; instead of,END, (J11patch
compatibility).
Both
/opt/XRXnps/bin/setlcddsDJDEspimm Enables the system to ignore 0x)b in
between DJHDE begin records (J11
patch compatibility).
LCDS
/opt/XRXnps/bin/setlcdsPmodeSwop Disables/enables swopping of BEGIN
values when there was a page
orientation switch (J11 patch
compatibility.
LCDS
/opt/XRXnps/bin/setlpcopycount Default is to ignore an LPR Copy
Count of 1. Utility to set lpr to accept a
copy count of 1.
LCDS
/opt/XRXnps/bin/setpapdbootswitch Sets Appletalk behavior for
AdboePS8.6 foreground job problem
if font list is large.
Both
/opt/XRXnps/bin/setsetlineterm
/opt/XRXnps/bin/setsetpclcontrol
(Option1)
Sets the default PCL decomposer line
termination mode (that is, CR.LF).
Use “setpclcontrol” tool in 3.1.
Black and
white
/opt/XRXnps/bin/setpclcontrol (Option2) PCL custom size factory default script
allows the Xerox FreeFlow Print
Server to better match HP’s variations
on customer size imaging.
Black and
white
/opt/XRXnps/bin/setpclcontrol (Option3) PCL saves resources function. Gives
capability to save pcl resource from
memory to disk on a job by job basis.
Black and
white