User's Manual

5-4 System Guide
Gateway and Network Configuration
SNMP MIB support
The Xerox FreeFlow Print Server SNMP MIB files use the Xerox
Common Management Interface (XCMI) version 4.0. The
following list indicates the MIB files included for this version of the
Print Server software:
• rfc1213 - RFC1213-MIB (MIB-II) - specifically system, if
numbers, at, ip, tcp, icmp, udp, snmp
• rfc2790/rfc1514 - HOST-RESOURCES-MIB (XCMI rev
000817) - rfc2790 is a later version of rfc1514. Specifically
hrDeviceTable and hrPrinter Table: hrSystem, hrStorage,
hrDeviceTable, hrPrinterTable, hrDiskStorageTable,
hrPartitionTable
• rfc2790t - HOST-RESOURCES-TYPES (XCMI rev 000815) -
same as 2.
• rfc1759 - Printer-MIB (XCMI rev 000818) - except fin tables
• 06gentc - X
EROX-GENERAL-TC
• 07gen - X
EROX-GENERAL-MIB
• 10 hosttc - XEROX-HOST-RESOURCES-EXT- TC - same as
2
• 11hostx - XEROX-HOST-RESOURCES-EXT-MIB - same as 2
• 15prtrxtc - XEROX-PRINTER-EXT- TC
• 16prtx - XEROX-PRINTER-EXT-MIB
• rfc1215 - SNMP traps version 1
Additionally the following MIBs files are supported:
• RFC 1213 MIB file
– The system Group
– The Interface Group
– The ip Group
– The icmp Group
– The tcp Group
– The udp Group
– The snmp Group
• Host Resource MIB file
– The System Group
– The Storage Group
– The Device Group
• Printer MIB file
– The General Printer Group
– The Input Group