User Guide

4
4-48 Performing Setup from the Control Panel
PCL Setup options
PCL Setup allows you to set defaults to control printer output. These defaults can be
overridden by the user from within an application, but they determine how a job will
be printed in the absence of other information.
NOTE: PCL printing is supported for Windows computers only. Mac OS computers
must use the PostScript driver.
NOTE: PCL Setup is not available from WebTools.
TO ACCESS PCL SETUP OPTIONS
1. In the main Setup menu, choose PCL Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you finish, save changes.
In the list of options that follows, default values, where applicable, appear in square
brackets.
Enable PCL
Yes/No [Yes]
Select Yes to enable PCL printing. If you select Yes, users can send print jobs to the
EX7750 using the PCL printer driver.
Default Orientation
Portrait/Landscape [Portrait]
Select whether a document to be printed is oriented along the short edge of the paper
(portrait) or along the long edge of the paper (landscape).
Form Length (lines)
5-128 [60]
Specify the number of lines to be printed per page.
Font Source
INTERNAL/SOFTFONT [INTERNAL]
Specify the font source to be enabled.