User Guide

5
5-44 Setting up the EX7750 from a Windows Computer
PCL Setup
PCL options can be set only from local Setup. If you do not have the FACI option
installed, change the PCL options on the EX7750 Control Panel as described in “PCL
Setup options” on page 4-48.
NOTE: PCL printing is supported for Windows computers only. Mac OS computers
must use the PostScript driver.
NOTE: In the following illustrations, “Device name” represents the model of the printer
connected to the EX7750, which is EX7550.
Enable PCL—Select to enable PCL printing. If you select it, users can send print jobs to
the EX7750 using the PCL printer driver.
Default Orientation—Select whether a document to be printed is oriented along the
short edge of the paper (portrait) or along the long edge of the paper (landscape).
Form Length—Specify the number of lines to be printed per page from 5 through 128.
Font Source—Specify the font source (Internal or Softfont) to be enabled.