User Guide

7
7-22 Administering the EX7750
Restarting the EX7750
Use the following procedure to restart the EX7750, rather than using the power button
on the front of the EX7750.
Restart Server restarts the EX7750 system software without shutting down the
EX7750 operating system.
TO RESTART THE EX7750
1. Make sure the EX7750 is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle.
2. Press the Menu button to display the Functions menu.
3. Use the down arrow button to scroll to the last screen, and choose Shut Down.
4. Use the line selection button to choose Restart Server.
To access the FACI, if installed, you must enter the user name and the password at the
FACI. The user name is Administrator, and the default password is “Fiery.1”.
5. Turn off and on the printer for the EX7750 to reach Idle.
If you do not turn off and on the printer, the message “Trying to connect. Please wait”
appears on the display window and FieryBar. If this message appears, turn off and on
the printer only.