User Guide

A
A-3 Troubleshooting
In Network Setup, when you configure the IPX (Novell) connection, the EX7750
queries the network for Novell file servers and trees, and attaches to them temporarily.
If a guest login is enabled, it will be used. If not, you are prompted to log in from
Command WorkStation.
Enter First Letters
of Server Name
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
File server name not found.
Try again?
No file server with those letters was found when EX7750
queried the network. Check the name of the NetWare file
server, check cable connections, and make sure the
NetWare server is turned on.
View Server List,
Edit Connection
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
No file server is selected. No file server has been added in Bindery Setup.
Add File Server
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
All connections used.
Remove server?
You have added the maximum number of bindery servers,
which is eight. You now have the option of disconnecting
one of those servers, so as to add another.
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup>Service
Setup > PServer Setup >
Bindery Setup)
No NetWare print
server found.
No print server was found when EX7750 queried the file
server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle EX7750 print
jobs (see “Configuring a NetWare server for printing” on
page 2-10).
Any Bindery Setup screen Novell error code, followed by
a message.
Novell NetWare has reported an error.
Command WorkStation reports the error number and
displays a brief message.
For the most common errors (listed in the following table),
a screen is displayed that allows you to retry the action that
evoked the error, such as adding a server. If that is
not possible, you are prompted to notify the Novell
administrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for
further explanation of Novell error codes.
After this Setup screen This message Means