User Guide

2
2-6 Setting up Network Servers
Configuring clients of a Windows 2000 server
Each client of a Windows 2000 server is already using a network protocol to
communicate with the server. Each client can print to the EX7750 if it has been shared
by a Windows 2000 server or Windows 2000/XP clients. In that case, the client does
not have to use the same network protocol to connect to the Windows server as the
server uses to communicate with the EX7750.
TO CONNECT AND PRINT TO THE EX7750 SHARED BY
A WINDOWS 2000 SERVER
•For Windows 2000/XP clients: Before printing, install the printer driver with the
User Software CD and configure the port.
After clients have selected the printer, they can choose it from the Print Setup,
Page Setup, or Print dialog box of their application. Clients can change printing
options for their own job, but printer properties appear dimmed and are unavailable
for changing. When a client chooses Print, the job is transmitted to the Windows 2000
print server, and from there to the selected print connection on the EX7750. The job is
listed in the Print Manager on the client workstation, and the administrator can track
it in the EX7750 window of the Print Manager on the Windows 2000 print server.