User Guide

2
2-13 EX7750 on a NetWare network
In order to set up the NetWare server in bindery emulation mode for printing to the
EX7750, the network administrator must do the following:
•Determine the Directory Services path to the container in which the print server and
the EX7750 Print queue will be created.
The container defines the “bindery context” for your network structure.
•Edit the bindery context.
•Activate the new bindery context.
Setting up a NetWare Print queue for bindery
For NetWare in bindery emulation mode, the NetWare print server and the EX7750
Print queue must be created and configured.
As with NDS, you can create several NetWare entities on a Novell server, and you can
then select them in Network Setup (see “PServer Setup options” on page 4-25).
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform Network Setup (see
“Network Setup options” on page 4-16), and verify that the settings reflect the entities
you created in the NetWare administrator utilities (see “Configuring a NetWare server
for printing” on page 2-10).
NOTE: For printing to the EX7750, connect all Windows clients to a NetWare server
and permit them to connect to the Print queues for the EX7750.
After the Novell server and the EX7750 have been set up, client Setup consists of:
•Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 2000/XP workstations, install Client Services for NetWare. Use the
CSNW option in the Control Panel to set printing options and specify a preferred
NetWare server.