User Guide

3
3-12 Preparing for EX7750 Setup
TO SCAN THE EX7750 FROM A WINDOWS COMPUTER
1. Disable all the print connections published in Server Setup and Printer Setup.
In Server Setup, set Enable Printed Queue to No. In Printer Setup, set the following:
•Publish Direct Connection to No
•Enable Print Queue to No
•Enable Hold Queue to No
2. Click Start in the Windows taskbar, choose Programs, and then choose Windows
Explorer.
The Windows Explorer window appears.
3. Choose Map Network Drive from the Tools menu.
The Map Network Drive dialog box appears.
The EX7750 server hard disk drive consists of three network drives, C:, D:, and E:.
These drives are hidden for network administrative functions and do not appear in the
Windows Explorer window. To map the C: administrative hidden share, enter the
following information in the Map Network Drive dialog box. In the Drive field, enter
an arbitrary alphabet letter, such as “X”. In the Path field, enter the EX7750 name (for
example, \\EX7750 name\c$). Confirm the EX7750 name on the Configuration page.
4. Click OK.
5. If you are prompted to enter a network password, enter “Administrator” in the
Connect As field, then “Fiery.1” in the Password field, and then click OK.
N
OTE: “Fiery.1” is the default password. This password can be changed.
6. To map the D: and E: drives, repeat steps 4 through 6.
7. Close Windows Explorer and start the anti-virus software.