User Guide

4
4-30 Performing Setup from the Control Panel
With an object selected, choose OK to travel down the tree, or choose “..” to go up the
tree. When you select an object and choose OK, that object is then displayed on the
top line, and the second line lists objects contained within.
When the container that contains Print queues is displayed in the second line, choose
OK. In the next screen, choose “.” and choose OK to select the object in the top line.
When the EX7750 displays the container name, choose OK to return to
PServer Setup.
Proceed with Bindery Setup (see “Bindery Setup options” on page 4-30), set the
Polling Interval (see “Polling Interval options” on page 4-36), or choose Exit PServer
Setup to return to the Service Setup menu when prompted.
Bindery Setup options
Network Setup
Service Setup
PServer Setup
Bindery Setup
Use Bindery Setup if you have already configured one or more bindery servers (file
servers running NetWare in bindery emulation) with a Print Server and a Print Queue
for EX7750 jobs. Before entering bindery settings, be sure the EX7750 is connected to
the network and the NetWare file server is running. If Guest Login is not supported,
you need a valid user name and password.
NOTE: The terms NetWare server, Novell server, and IPX file server are in common use
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
NOTE: You must use a separate file server for Bindery than the one you used for NDS.
You cannot use the same file server for both Bindery and NDS printing.