User Guide

4
4-37 Network Setup options
Use Automatic Configuration
Yes/No [Yes]
This option appears if you chose DHCP or BOOTP as the protocol for automatically
obtaining the IP address of the EX7750.
Choose Yes and the EX7750 uses a WINS name server and automatically obtains its
IP address. Make your choice and proceed to the Point and Print Drivers option.
Choose No to proceed to the Use WINS Name Server option, where you specify
whether to use a WINS name server, and then to the WINS IP Address option, where
you specify its IP address.
Use WINS Name Server
Yes/No [No]
Specify whether to use a WINS name server. Broadcasts from SMB devices cannot pass
across a router without a WINS name server. Setting up the WINS name server is
outside the scope of this manual. To find out if a name server is available, contact your
network administrator.
WINS IP Address
[127.0.0.1]
This option appears only if you choose Yes for Use WINS Name Server. Change the
default address to the correct IP address for the WINS Name Server. Obtain the
correct address from your network administrator.
Point and Print Drivers
PS/PCL [PS]
Select the type of print driver to be downloaded when a printer is installed on remote
workstations via Windows printing.
Server Name
Default Name
The server name is the name that will appear on the network for accessing the EX7750
via SMB. The default name is the same as the server name assigned in Server Setup (see
“Server Setup options” on page 4-13).