User manual

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)

1-15

The numbers and symbols shown in the table above refer to the

following:

*: During procedures that use the message display but are not

included in the initial procedures listed in the table above, the

procedure will work just like this operation.

O:The additional operation will work unconditionally with the

initial operation.

–: Unrelated to fax operation.

X: The additional operation will NOT work with the initial

operation.

U: The additional operation will work with the initial operation

under certain conditions. The adjoining numerals refer to the

following conditions:

1: Print out will be accomplished once printing is possible and the

fax is in the Fax Operation mode.

2: Direct Reception will switch to Memory Reception and print out

will be accomplished once printing is possible and the fax is in

the Fax Operation mode.

3: Printing can be stopped and copies made.

4: Settings made in the Fax Operation mode will be deleted once

the machine is switched to the Copy Operation mode.

5: It is possible to add fax default settings, but those

communication settings, etc., that have already been made will

be canceled.

6: Cannot be used with TWAIN. Scan to PC and E-Mail are

available.

7: Cannot be used with TWAIN. Scan to PC and E-Mail are

available in individual transmission modes, but not in the

continuous transmission mode.