Installation Guide

Configuring FlowPort
Chapter 1: Installing the FlowPort Server ❖ 1–25
Configuring FlowPort
To configure the FlowPort server once it is installed:
1
Open a Web browser, either on the same machine or on a
client workstation (refer to the Performance Considerations
section to set the browser priority).
2
In the Address (or Location) box, enter the server’s name.
For example, for a server named “astro,” and assuming
that the FlowPort server is running on port 80, you would
enter:
http://astro
The FlowPort Welcome page displays.
3
In the username box, type admin (the default for
FlowPort administrator user name).