Installation Guide

Repository Setup
Chapter 1: Installing the FlowPort Server ❖ 1–35
9
For Type of installation, select API Install.
10
Follow the onscreen instructions to complete the
installation.
iManage
This repository allows users to store FlowPort documents
in an iManage repository on the network. iManage
supports both writing and reading by FlowPort. Users can
store documents and also access (retrieve) stored
documents from an iManage repository via Document
Tokens and Document Catalogs. Document properties,
selected by the user via a checkbox on a PaperWare form,
are stored with the document.
After installing FlowPort, you must perform the following
steps in order to use iManage with FlowPort.
1
Insert the iManage CD into the server’s CD-ROM drive.
Note: For installation details, refer to the iManage
Administration Manual for details.
2
If the iManage CD installation program does not run
automatically:
A Double-click to open My Computer.
B Click the CD-ROM drive.
C Click setup.exe.
3
Follow the onscreen instructions to install only the
minimum configuration from the iManage CD-ROM.
When prompted, deselect any iManage options that are
listed.
Note: Selecting and installing iManage options
can cause conflict or errors with the FlowPort
server.
To Set the iManage Environment Path
1
On the FlowPort Windows NT workstation, click the Start
button, select Settings, and click Control Panel.
2
Double-click System and click the Environment tab.