Installation Guide

Repository Setup
1–36 ❖ Xerox FlowPort Installation and Setup Guide
3
From the System Variables list, select the variable Path.
4
Add C:\Program Files\iManage to the end of the Path
value.
Note: If you installed iManage to a different directory,
replace C:\Program Files\iManage with your
iManage directory name.
Documentum
This repository allows users to store documents in a
Documentum repository on the network. Documentum
supports both writing and reading by FlowPort. Users can
store documents and also access (retrieve) stored
documents from a Documentum repository via
Document Tokens and Document Catalogs. Document
properties, selected by the user via a checkbox on a
PaperWare form, are stored with the document.
After installing FlowPort, you must perform the steps
below in order to use Documentum with FlowPort.
1
Insert the Documentum CD into the server’s CD-ROM
drive.
Note: For installation details, refer to the
Documentum Administration Manual for details.
2
If the Documentum CD installation program does not run
automatically:
A Double-click to open My Computer.
B Click the CD-ROM drive.
C Click setup.exe.
3
Follow the onscreen instructions to install only the
minimum configuration from the Documentum
CD-ROM. When prompted, deselect any Documentum
options that are listed.
Note: Selecting and installing Documentum
options can cause conflict or errors with the
FlowPort server.