Installation Guide

FlowPort System Requirements
Chapter 1: Installing the FlowPort Server ❖ 1–5
Use the nslookup command in Windows as follows:
A Open a DOS window
B At the DOS prompt, enter: nslookup DNS-hostname
If the hostname that you entered is registered, you will
receive a response with a Name (DNS name) plus an IP
Address. This means that you can use the fully qualified
hostname to access the FlowPort server in a Web
browser.
If the hostname is not registered, you will get a message
that the server cannot find it. Get the correct DNS name
(if there is one), or use the FlowPort server’s IP address
to access it.
Network access to a Xerox Document Centre ST, or
Internet Fax machine
No FTP or Email (such as Microsoft Exchange) service
running on the same server as FlowPort
Network Environment
The following services can be provided anywhere on the
network:
SMTP mail host; for example, a Microsoft Exchange
server may be used as the mail host
SMTP mail DNS hostname or IP address:
______________________________________________
SMTP email functions
Domain Naming System (DNS)
Optional (if not printing to a Xerox Document
Centre): PostScript Level 2 (or higher) or HP-PCL Level
3 (or higher) networked printer (must be TCP/IP- and
lpr-enabled)