Software Version 9.3/10.
©2011 Xerox Corporation. All rights reserved. XEROX® and XEROX and Design®, Xerox Nuvera® and FreeFlow® are trademarks of Xerox Corporation in the United States and/or other countries. Windows® is a registered trademark of Microsoft Corporation in the United States and/or other countries. Changes are periodically made to this document. Technical inaccuracies and typographic errors will be corrected in subsequent editions. Document Version: 10.3 (May 6, 2011).
Table of Contents Preface....................................................................................................................... v General Purpose and Audience.......................................................................................................v 1 2 3 Software Versions....................................................................................1-1 New Software Capabilities...................................................................2-1 Release Issues ........
Preface General Purpose and Audience This document for the Xerox Nuvera contains the following information: • Software release deliverables and version numbers • New features in this release • Issues resolved in this release • New issues present in this release • Known operating limitations that are to be resolved in a future release Standard system operating procedures and information can be found in the following documentation: • For specific information about system operations, performance and
Preface Xerox Nuvera [This page left intentionally blank] vi Hints and Tips Guide
1 1 Software Versions This document references the following software versions: Item Version Number Free Flow Print Server 7.0 SP3 / Tigris System software For 9.3 software RV.9.3.39 CP.73.B0.84C For 10.3 software RV.10.3.39 CP.73.B0.84C IPDS (must match DocuSP version) CP.73.A1.31 FreeFlow Print Server 7.0 SP3 Remote Workflow * English CP. 73.B0.73 P/N 301E62031 Multinational CP. 73.B0.41 FreeFlow Print Server 7.0 SP3 and Variable Input version FreeFlow Print Server 7.
2 New Software Capabilities 2 The following is a list of new capabilities enabled with version 9.3/10.3 software: 1. Customer enablement of the Xerox Nuvera Flexible Speed capability, which allows for temporary speed upgrade licensing for the Nuvera 100/120/200 EA/MX Production Systems, to help meet short-term print volume fluctuations. This capability allows 30, 60 or 90 day temporary speed upgrades for a Nuvera 100 to a 120 or 144, for a Nuvera 120 to a 144, or for a Nuvera 200 to a 288.
3 Release Issues 3 Issues resolved The following is a list of Nuvera 9.2/10.2 issues that have been resolved and no longer apply to Xerox Nuvera 9.3/10.
Release Issues Xerox Nuvera Issues remaining from previous release Build Job Description 11x17 and 8 1/2x14 build jobs are printing with second segment as 8.5x11 instead of 11x17. Workaround When using Build Job, please leave the paper selection set to APS before entering Build Job. Once you are in Build Job you can change the paper selection to any stock you wish. You also can leave it set to APS. Data Overwrite feature may not complete if it is started while in sleep Mode.
Xerox Nuvera Release Issues When exiting MICR Mode, the Edge erase remains at no erase Description When exiting MICR Mode, the edge erase setting will remain at “none”. We leave it to the user to set the edge erase to the values they want. Workaround Do not forget to set the edge erase to desired setting after exiting MICR Mode. Annotation-1 Description Do not use Annotation when feeding from the short edge feed tray and selecting the 180 degree rotate. The annotation will be upside-down.
Release Issues Xerox Nuvera PDF and HTML Files Viewed from CD Description Operator needs to view PDF or HTML files on a CD. Workaround Do one of the following: 1. 2. To view PDF files, go to [Launch -> Applications -> Graphics -> PDF Document Viewer] and open the PDF on the CD. To view HTML files, go to [System -> Remote Services -> Options -> Launch Web Browser].
Xerox Nuvera Release Issues When printing files from CD, all pending jobs go to reject state Description When printing files from the CD and the user selects the eject button will cause all pending jobs to change to reject state. Workaround Do not eject the CD while printing files for the CD. If all this was done, all jobs will need to be resubmitted. System may stop at SUNOS banner screen during power on Description After powering on the printer, the system may stop at a black screen with the “SUNOS 5.
