Printer User Guide Phaser 2135

User Guide
51
■
Every 44 mm or 1.75
inches of the same
color
■
One of the rollers in
an imaging drum are
scratched or
damaged.
■
Replace the
corresponding
imaging drum.
Back-Side
Contamination
Toner has been
deposited on the
non-imaged side of a
print.
There is excess toner in
the paper path.
■
The fuser has
contamination.
To clean up any residual
toner, print blank sheets
of paper.
■
If the problem persists,
inspect the fuser for
excess toner and
replace.
Print Defects and Potential Remedies (cont'd.)
Print Quality Problem Common Causes Potential Remedies
0748-53
0748-54
Print Quality