Administrator's Guide
Table Of Contents
- Contents
- Introduction
- Initial Setup
- Network Configuration
- Security
- Printing
- Accounting
- Administrator Tools
- Monitoring Alerts and Status
- Configuring Stored File Settings
- Energy Saving Settings
- System Settings
- Taking the Printer Offline
- Smart eSolutions and Billing Information
- Cloning
- Font Management Utility
- Customizing Printer Contact Information
- Updating the Printer Software
- Date and Time Settings
- Watermarks and Annotations
Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
37
IPP
Internet Printing Protocol (IPP) is used for remote printing and managing print jobs.
Enabling IPP
1. In CentreWare Internet Services, click Properties > Connectivity > Port Settings.
2. Select Enabled next to IPP.
3. Click Apply.
Configuring IPP
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols > IPP.
2. Next to Add Port Number, type the port number to be used by the printer. The default port
number is 80.
3. Select Enabled next to TBCP Filter.
4. To allow only one specific user to control or delete any print job, select Enabled next to
Administrator Mode.
5. Type the Connection Time-Out.
The default time is 60 seconds.
6. Click Apply.