Administrator's Guide
Table Of Contents
- Contents
- Introduction
- Initial Setup
- Network Configuration
- Security
- Printing
- Accounting
- Administrator Tools
- Monitoring Alerts and Status
- Configuring Stored File Settings
- Energy Saving Settings
- System Settings
- Taking the Printer Offline
- Smart eSolutions and Billing Information
- Cloning
- Font Management Utility
- Customizing Printer Contact Information
- Updating the Printer Software
- Date and Time Settings
- Watermarks and Annotations
Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
39
Bonjour
To view the Host Name and Printer Name automatically assigned to this machine under Bonjour, do
the following:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click Bonjour.
Note: If Bonjour is not displayed in the Properties tab, click Port Settings and check Bonjour. Click
Apply. If Bonjour is not available in the Port Settings list, click TCP/IP in the Protocols folder, and
scroll to the bottom of the displayed page to Zero-Configuration networking.
3. Under Bonjour Port Status, select Enabled.
4. Make a note of the Host Name and Printer Name for reference in working with other Bonjour
(zero-configuration) connected computers.
Note: You can change these names, however the Host Name must be unique on the network. The
automatically generated Host Name should assure its uniqueness. The Host Name has a
32-character limit, and the Printer Name has a 62-character limit. If you change either name, be
sure to click Apply. You can reboot the printer remotely using the Reboot Machine button, which is
available on the Status tab of CentreWare Internet Services.